Spall

Spall TX

Spall TX is a low viscosity repair material with 100 seconds of working time and a rapid 10 minute cure.

Spall FX2

Spall FX2 features the benefits of Spall FX with 200 seconds of working time and a quick 30 minute cure. Ideal for hand mixing or pre polish filler applications.

Spall FX

Spall FX is an ultra-low viscosity repair material with 100 seconds of working time and a rapid 10 minute cure.

Spall TX2

Spall TX2 features the benefits of Spall TX with 200 seconds of working time and a quick 30 minute cure. Ideal for hand mixing with sand and cementituous material.

Spall TX3

Spall TX3 offers maximum working time, 300 seconds, while maintaining a quick 45 minute cure. Ideal for bulk hand mixing and pre polish filler applications.

Spall LPX

HT Spall-LPX is a rapid set, high strength medium viscosity Urethane repair material.

Spall TXGel

TX Gel is a quick curing non sag concrete repair material.

ProMender Flex

ProMender Flex is a quick curing, high strength and shaveable crack repair product.

Polyurea

PE 65

Offers maximum flexibility while remaining rigid enough to protect the edges of the concrete. Ideal for floors with primarily foot traffic such as schools.

PE 75

A good mix of flexibility and rigidity, this material is ideal for floors with light equipment and cart traffic such as retail environments.

PE 85 M.I.

Polyurea material being oured into a pump

The industry standard. Hi-Tech PE 85 Moisture Insensitive is ideal for warehouse environments that include heavy equipment and machinery like forklifts.

Epoxy

Fast Set Gel

A multipurpose, 2 component, 100% solids, solvent-free, moisture insensitive structural epoxy adhesive.

Capping Gel

HT Capping Gel is a two component, 100% solids, high aspect ceramic-blend epoxy.

HT- 150 SLV

Super low viscosity for deeper penetration, high strength, two component epoxy adhesive binder.

HT-500 LV

Low viscosity for deeper penetration, high strength, two component epoxy adhesive binder.

HT-Fluid

A solvent-free, moisture insensitive, two-component epoxy adhesive that structurally bonds new concrete to old concrete.

HT Rapid Cap Seal

HT Rapid Cap Seal is a 1:1 ratio, non-sag cap seal used to set surface mounted epoxy ports.

Accessories

22 oz Hand Tool

This tool features a heavy duty steel construction, ergonomic handle and springs to ensure quick on ratio distribution of Hi-Tech products. Accommodates standard 22 ounce dual component cartridges.

Battery Cartridge Tool

Hi-Tech Systems Battery Tool

This tool makes the application of Hi-Tech products quick and consistent. A great option for small and medium sized jobs or where space is limited.

Shaver

The Hi-Tech shaver was designed and built in house to make shaving excess polyurea easier.

Soaper

Soaping the sides of control joints has long been an industry trick to make shaving joints easier.

Trowel

Hi-Tech Systems Trowel used with Spall TX3 as a pre polish filler close up

The Hi-Tech trowel makes application of TX3 and FX2 pre polish filler a snap.

Power Shaver

The Hi-Tech Power Shaver is a patented ridealong machine designed to shave the overfilled polyurea profile flush to concrete.

Water Stop

HT-120LV

HT 120LV hydrophobic polyurethane  injection grout

A 100% solids hydrophobic polyurethane injection grout designed to seal actively leaking cracks or joints commonly found in concrete structures.

Injection Packers

waterstop injection packers hi-tech systems

Hi-Tech high pressure mechanical injection packers, available in 1/2 and 3/8 diameters.

Joint Cleanout Saws

4.5 inch Grab and Go Crack Chaser

Our 4.5” dustless concrete crack chaser will increase your productivity and safety at the same time. Excellent blade visibility for sighting cracks. Maneuvers better than any saw on the market.

9 inch Multi Saw

The reversible 9” Dustless Multi Saw can safely be operated in the forward direction. This technology allows you to have excellent blade viability for crack chasing and contoured cuts as a down cut saw. Rotate the handle and now it’s an up cut saw for straight cuts and joint clean out.

10 inch Tank Joint Clean out Saw

Our heavy duty 10” Tank delivers excellent dust control for making new control joints or cleaning out existing ones. At 65 pounds, it’s an excellent weight for reducing vibrations. Light enough for one person to load and unload saving you time and money.

Pumps

SB2005 Pump

Hi Tech Systems Polyurea Pump SB2005 front

Full size Dual component polyurea pump, featuring 6.7 gallon tanks to easily accommodate an entire 10 gallon kit

SB2009 Pump

Hi Tech Systems Polyurea Joint Filler Pump front

Compact dual component polyurea pump featuring 3 gallon tanks, smaller frame size and standard Battery/Inverter/Charger setup

SB2017x2

The SB2017x2 is the latest polyurea pump addition which features 120 gallons capacity and two operating handles and controls.

Pumps Water Stop

Injection Pro 30001C

polyurethane injection pump

The Hi-Tech Injection Pro 30001C is a positive displacement, polyurethane injection pump capable of pressures up to 3000 PSI and volume up to .47 GPM

Injection Pro 60001C

polyurethane injection pump

The Hi-Tech Injection Pro 60001C is a positive displacement, drill operated single component polyurethane injection pump. capable of pressures up to 6000 PSI.

Epoxy Pumps

Injection Pro 60002C

epoxy injection pump

The Hi-Tech 60002C professional grade, two component, drill operated epoxy injection pump is durable and is perfect for everyday use.